Solderless setup with all required wiring available here.
These are part of our humbucker sized Stratocaster single coil range. A Strat single coil is encased between a humbucker baseplate and humbucker cover to allow them to be installed in any standard humbucker equipped guitar. There's a tiny bit of treble loss due to the additional metal content in the pickup, but they're otherwise constructed and tonally identical.
These pickups take the typical vintage 42 Stratocaster wind to the max. They are wound until they can be wound no more - giving you an extra kick to push your amp into a beautiful bluesy overdrive, whilst preserving the chime and clarity that can only be achieved by 42 gauge wire.
A higher wind gives the pickups a more prominent mid range, but not to the extent that it is overbearing. The hollow, woody EQ we've come to know and love in a great Stratocaster pickup set is still present - the 42 awg wire and handwinding technique contribute to keep the mids from dominating the sound, allowing a wide spectrum of notes to be heard with the ultimate level of clarity when complex chords are struck. Because of their recipe being very similar to a low output vintage Strat pickup, rolling off the volume knob will give a very convincing imitation - of course with the added versatility to open the volume full and have that Texan sizzle at your beck and call.
Specifications (neck/bridge):
Resistance (ohms): 6.3k/7.2k
Magnets: hand beveled alnico 5 rods
Lead wire: braided single conductor
Pole spacing: 52mm
Wax potted