Seymour Duncan Pearly Gates Humbucker - SH-PG1B Bridge Nickel

Neck: P.A.F. style humbucker with a ton of rude Texas attitude for a neck tone that stays warm and focused. Bridge: Imagine a P.A.F. with extra midrange sizzle that’s been dipped in Texas hot sauce. That’s the Pearly Gates. Set: This calibrated set of our Pearly Gates humbuckers packs tons of focused midrange attitude with raw Texas sizzle. Trembucker: The Pearly Gates Trembucker is an F-spaced version of our special P.A.F. with extra midrange sizzle and tons of Texas attitude. Now available with 3 new covers: Black Powdercoat, Raw Nickel Tortoiseshell & Raw Nickel Radiator.

Details Neck: The Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons 1959 Les Paul. It is a P.A.F. with a unique tonal character and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with its stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Pair with the Pearly Gates bridge model for a classic setup, or match it with a higher output bridge pickup like the Custom Custom for a more aggressive rock setup. Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo. Bridge: The Pearly Gates bridge captures all the mojo of the original bridge pickup from Billy Gibbons’ 1959 Les Paul. Seymour discovered the pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The Alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. Pinch harmonics really sing with this pickup too. It really has a growl all its own and will help to bring any humbucker-style instrument to life, but it’s also great for adding some growl to a Stratocaster. Match with the Pearly Gates neck model for the full Texas experience. Hand built in our Santa Barbara, CA factory, the Pearly Gates model humbucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymours original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan for that unmistakable vintage mojo. Set: Our country fried Pearly Gates Set transforms any Les Paul style guitar into a classic rock outlaw. The Pearly Gates neck captures all the mojo of the original neck pickup from Billy Gibbons’ 1959 Les Paul. It is a P.A.F. with a unique tonal character and more midrange than typical humbuckers from that time. The result is a neck pickup that cuts through with stronger tailored mids, but still has the open and airy treble attack of the alnico 2 bar magnet. Combined with a warm, spongy low end, this pickup is great for both rhythm and lead playing. Seymour discovered Billy’s bridge pickup had slightly more output than most P.A.F.s, which helped to give it the extra drive that makes this pickup so special. The alnico 2 bar magnet keeps the high end sounding airy but focused, and the midrange emphasis gives it a unique Texas sizzle. It really has a growl all its own and will help to bring any humbucker style instrument to life. Hand built in our Santa Barbara, CA factory, the Pearly Gates humbuckers use an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance. As with all of our P.A.F. style humbuckers, every Pearly Gates is wound on Seymour’s original Leesona winding machine from the early Gibson factory in Kalamazoo, Michigan, for that unmistakable vintage mojo. Trembucker: The Pearly Gates Trembucker has slightly more output than most P.A.F.s, which helps to give it the extra mids that make this pickup so special. The alnico 2 bar magnet keeps the high end sounding open and airy, and the midrange emphasis gives it a unique Texas sizzle. It really has a growl all its own, and will help to bring any humbucker style instrument to life. Match with the Pearly Gates neck model for the full Texas sizzle. Trembuckers have wider pole piece spacing, perfect for symmetrical positioning under the strings of guitars with a tremolo or wide spaced hard tail bridge (2 or wider from the centre of the Low E to High E directly over the bridge pickup). Hand built in our Santa Barbara, CA factory, the Pearly Gates Trembucker uses an alnico 2 bar magnet, nickel silver bottom plate, 4-conductor lead wire for multiple wiring options, and is vacuum wax potted for squeal-free performance.

SKU SH-PG1 Country of Manufacture United States Manufacturer Seymour Duncan Position No Colour No Conductor 4 Conductor Magnet Alnico II DCR Neck: 7.3 / Bridge: 8.1 Output Vintage String 6 Mount Humbucker Type Humbucker