Sub-Zero solderless connector setup
Sub-Zero solderless connector setup
Sub-Zero solderless connector setup
Sub-Zero solderless connector setup
  • Load image into Gallery viewer, Sub-Zero solderless connector setup
  • Load image into Gallery viewer, Sub-Zero solderless connector setup
  • Load image into Gallery viewer, Sub-Zero solderless connector setup
  • Load image into Gallery viewer, Sub-Zero solderless connector setup

Sub-Zero solderless connector setup

Regular price
£175.00
Sale price
£175.00
Regular price
Sold out
Unit price
per 

The solderless connector setup includes a circuit board loaded with all the favourite USA grade electronics (Switchcraft jack, Oak Grigsby switch, CTS potentiometers, Orange drop capacitor) along with the pickup set. This circuit board simply drops into your Strat, then you plug in the connectors we've added to the end of the pickup leads into the circuit board. The Strat setup comes with default 250k potentiometers, 5 way switch and 0.047uf capacitor. No soldering is required at all, making the installation job take about 10 minutes in total!

 

Trying to achieve a P90 tone in a typical Strat single coil spacing isn't a new concept at all. However, this innovative approach to achieving that same goal brings with it many benefits over the prior designs consisting of small bar magnets and humbucker bobbins with steel screws.

The Sub-Zero single coils use massive coils (like a P90) with long alnico magnets, and wide 42 AWG wire (like a P90). Previous attempts to recreate a P90 tone in a Strat single coil format had to be wound with 43 AWG (thinner) wire in order to get enough winds into the small humbucker bobbin to be in the same ballpark of output as a P90. This thinner wire added tons of compression and a muddied treble response - not P90 like at all!

The Sub-Zeros use alnico rods, which is entirely new to this type of design. Previous designs couldn't get near the magnetic field strength of a proper P90 - their little bar magnets just didn't give the juice that two large bar magnets do. Alnico rods have a much stronger magnetic field at the string, meaning they can imitate that strong field better. The combination of the stronger magnetic field and a massive coil means these pickups roar just like a P90, rather than being a compressed tame single coil like those that have come before. An added bonus is that they look completely stock (after being installed) - so you can mix and match with your favourite standard Strat singles (which, obviously, you can find in our range!).

The final tweaks to get the tones absolutely spot on was to add some passive filtering to adjust the EQ to make the sound just that bit more authentic P90.

These pickups are designed to imitate vintage P90s on standard Strat control values of 250k potiometers and 0.047uf capacitors.

These are slightly taller than the typical single coil - 23mm tall including the output cables. Please check your guitar has space to accommodate this before purchasing.

 

Specifications (neck/middle/bridge):

Magnets: alnico 4+5 hybrid/alnico 4+5 hybrid/alnico 2
Spacing: 52mm/52mm/52mm
Output wire: modern style cloth covered
Wax potted

 

Important note: these pickups are very sensitive to height adjustment. It is suggested, for the most P90 like tone, to set these low.

Supplied with mounting screws and tubing.