Stratocaster tremolo bridges with piezo transducers on each saddle. The easiest way to get acoustic tones from your guitar! Please note installation will require running the output wire into a preamp.
These are post mounted bridges (posts included) which install exactly like the normal version. The output lead then needs to be run through the string claw ground hole from the front face route into the control cavity.
Each saddle has a small piezo affixed to pick up the physical movement of the saddle as the string is played. The small piezo output must then be fed into a preamp to give it the output level to balance with the standard magnetic pickups on an electric guitar.
String spacing: 52.5mm
Post spacing (centre to centre): 56mm
Sustain block depth: 40mm
Output lead: Approximately 35cm with 1/8inch mono jack